AUDIO | VIDEO MEDIA CONTROLLER
USER GUIDEEuControl
66
7.13.3 Page
The Page command configures a Soft Key to jump to a specific Soft Key page.
Select Touchscreen or Surface from the Section menu, and then select Next
Page, Previous Page, or Jump to Page from the Action menu. The Page field, ac-
tive only when Jump to Page is selected, specifies the Page number.
Figure 7-4 Jump to Page dialog configured to jump to page 1 of the Surface Soft Keys
7.13.4 MC
The primary function of the MC command type is to recall a Layout (see Layouts
on page 59). Select Recall Layout from the Action menu and select the Layout
number from the Layout menu. The other commands are for compatibility with
the MC Pro and are not used with the MC Control.
Figure 7-5 Recall Layout Command
To Next Page
Loading...
Need help?
General
