EasyManua.ls Logo

Everest VX - Site Preparations; Machine Rear

Everest VX
71 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
handling equipment that can carry the 1,895 lb ice machine (empty weight) and properly
position it on the foundation.
Figure 13: Machine Rear
Site Preparations
Prepare foundation to meet physical requirements identified below. A reinforced concrete pad is
recommended. If the machine is subject to vehicular traffic, install protective pipe bollards as
needed. We recommend two (2) 6-inch concrete filled pipe bollards positioned a minimum of 40
inches off of the front two corners of the machine.
21
Vb000122015

Table of Contents