○ Check bag door locking/unlocking mechanism
● Coin/Bill unit
○ Do par/float procedure to coin manager
○ Empty coin bin
○ Empty bill acceptor cartridge
● Payment tests
○ Insert one each coin denominations and test coin return button
○ Insert lowest bill denomination and test coin return button
● Vending tests
○ Vend ice – check ice quality (web thickness, clarity, pocket depth)
○ Vend water – listen for beep to see if optional UV unit bulb needs to be changed
Recommended Monthly Maintenance Checklist
● Coin/Bill systems (for exact procedure steps, reference MEI manuals)
○ Clean & lubricate all moving parts on coin input system including metal parts,
springs, bushings, slots
○ Clean & lubricate coin manger by following manufacturers recommended
cleaning procedure
○ Clean & lubricate bill acceptor by following manufacturers recommended
cleaning procedure
● Plumbing systems
○ Use washdown hose to spray and wipe down lower drip tray
○ Verify lower tray drains properly to service drain
○ Remove and visually check the 10 micron filter cartridge to see if it requires
changing
○ Visual check of the scale stick to see if it requires changing
○ Check for minor rust spots and treat if necessary
Recommended Quarterly Maintenance Checklist
● Barrel/saddle
○ Pressure wash entire barrel/ saddle system
● Scotsman cuber
○ Clean air filters
○ Clean and sanitize procedure
● Test Flash memory – used for backup of data if power goes out
● Test Power Out
Seasonal Maintenance Checklist
● Winterize machine if in climate where freezing weather is possible
To Next Page