USA Technologies
ePort G10 Telemetry System - All documentation for the USA Technology ePort G10 is
provided directly from USA Technologies. If the G10 unit was factory installed then any hard
copy documentation which was provided by the manufacturer is shipped with the machine. It is
in the documentation folder hanging on the inside of the RF door of the machine. Otherwise
you can download the manufacturer’s current support documentation at http://usatech.com.
Relevant documents are:
● G10 Datasheet.pdf
● USA Technologies Warranty.pdf
Assistance with USA Technology products - for all technical issues regarding your ePort,
please reach out to USA Technologies via http://usatech.com or call their technical service line
directly by calling 1-888-561-4748.
To Next Page
Loading...