25
2525
25
7. SUMMARY
All cameras’ statuses are shown in the SUMMARY table. The table is only to check
camera overall statuses, not for changing them. Use the Jog to change which option
you wish to check.
Note: The SUMMARY table also exists in ALARM, MOTION and VIDEOLOSS
SETUP MENU. All of these SUMMARY tables are also for checking particular overall
statuses, not for setting.
8. Copy camera’s setting from a camera to other cameras
In order to quickly copy the setting from one camera to other cameras, we provide a
copy function for camera settings. Highlight the desired camera from the list on the left,
and then press COPY. COPIED will show up in the top right corner of the screen. Dial
the Jog to the camera you would like to copy to, and then press SEARCH to paste. The
previous settings of the camera will be overwritten, and PASTED will be displayed in the
top right corner.
Note: TITLE, PTZ ID, and INSTALL/COVERT cannot be copied. These 3 options
need to be set independently.
Diagram 3.5
To Next Page
Loading...
