EverFocus EDVR16D1 - Email

39
3939
39
1. PROTOCOL: Select which communication protocol to use with Alarm servers or Alarm
receiving clients.
TCP: communicate with client via TCP protocol.
UDP: communicate with client via UDP protocol
2. PORT NUMBER
Set the communication port with Alarm server.
3. UNIQUE ID
Set the ID number of your DVR to Alarm server.
4. SERVER 1
Assign the IP address of Alarm server 1.
5. SERVER 2
Assign the IP address of Alarm server 2.
6. SERVER 3
Assign the IP address of Alarm server 3.
3.7.3 EMAIL
Diagram 3.12