35
3535
35
signal 3 transmits and 4 = output signal 4 transmits. To change this, simply use the
Jog Dial on the DVR.
(Only EDVR16D3 model has 4 alarm outputs, all others have only 1 alarm output).
5. ALARM EMAIL:
Select “YES” for sending an email when Video Loss event occurs. The email address
can be set in the NETWORK SETUP MENU.
6. BUZZER: Audible alarm buzzer.
ENABLE: To enable a VIDEOLOSS buzzer.
DISABLE: To disable a VIDEOLOSS buzzer.
7. ALARM NETWORK:
YES: Enable alarm network.
NO: Disable alarm network.
8. SUMMARY
All video loss’s statuses are shown in SUMMARY tables. These tables are for checking
video loss overall statuses, but not for changing them.
To Next Page
Loading...
