67
6767
67
An: an Alarm event. n = Alarm input number.
Dn: HDD overheated. Overheat temperature is
based on HDD temperature set in Warning Setup
Menu. “n” is HDD number
Fn: Fan fail, n = fan number 1~3.
LH: (Logical Head): Earliest recorded date & time on
HDD.
LUn: Local User login record, n = access level 1~3;
where 1 is Administrator, 2 is Operator and 3 is
General.
Mn: a Motion event. n = Channel number.
PH: (Physical Head): Physical starting point of
HDD’s disk space.
PL: a Power Loss event.
RTn: a power return event in a schedule recording
mode, n = Time Period 1~8.
RTN: a power return event in Normal/Instant
recording mode.
RUn: record of Remote User login through Internet
Explorer, n = user 1~6.
Tn: a scheduled Time Period recording event, n =
Time Period 1~8.
TN: a Normal/Instant recording event.
Vn: a Video loss event. n = channel number.
DLB: Begin DayLight saving time.
DLE: End DayLight saving time.
S1: Switch to HDD1.
S2: Switch to HDD2.
The last two columns are the date and time of event.
The event types and number show on the second column of the search list.
To Next Page
Loading...
