HDSD9545DLY - PRO Profanity Bypass Delay Manual
OPERATION Revision 1.3.7 Page 3-13
3.10. CONFIGURING THE VIDEO
The VIDEO menus are used to configure the video and reference standard, system phasing, and other
general items related to the video. The chart below shows the items available in the VIDEO menu.
Sections 3.10.1 to 3.10.5 provide detailed information about each of the sub-menus.
Video Standard
Sets the video standard for the system
Video Reference
Selects the reference video standard
Output H Phase
Sets the video output horizontal phase with respect to the reference video
Output V Phase
Sets the video output vertical phase with respect to the reference video
Bypass Mode
Selects the video bypass mode
Safe Mode
Selects the Mode of Operation for the Safe Input
Pgm Blur Factor
Selects the amount of video blur on the program delayed video path
Safe Blur Factor
Selects the amount of video blur on the safe delayed video path
3.10.1. Setting the Video Standard
VIDEO
Video Standard
Std:525i/59.94
Std:625i/50
Std:1080i/59.94
Std:1080i/50
Std:720p/59.94
The Video Standard menu is used to select the type of video being used.
To Next Page
Loading...
