evertz XRF1 - Configuration Main Menu Options and Parameters; CONFIGURE OUTPUT Menu Options and Parameters; Table 4-9: Configuration Menu Options; Table 4-10: Configure Output Menu Options

XRF1/XRF1A 16x16 RF Router Manual
XRF1 - 4-14 Revision 1.2 FRONT PANEL INTERFACE
4.5.2. Configuration Main Menu Options and Parameters
The following options are available at the top level of the configuration menu:
PARAMETER DESCRIPTION
Configure Input
Allows configuration of all inputs (see section 5.2 for more info).
Configure Output
Allows configuration of all outputs.
Lock Idle Panel
Allows locking of panel after inactivity for 5 minutes.
Panel is unlocked by pressing the [PANEL LOCK] key.
IP Address
Displays the router IP address.
Firmware Version
Displays the firmware version.
Reboot
Allows a ‘warm’ reboot of the router processor.
Configuration settings are maintained during a reboot.
Table 4-9: Configuration Menu Options
4.5.3. CONFIGURE OUTPUT Menu Options and Parameters
LEVEL1:
PARAMETER DESCRIPTION
All Outputs
Allows configuration of all outputs.
Channel 1 to 16
Output channel selection.
Table 4-10: Configure Output Menu Options
LEVEL 2: (options available for ALL INPUTS or individual input channel as selected in Level 1)
PARAMETER DESCRIPTION
Output Delay
Accesses output delay setting, set from 0 to 5000ms in 100ms increments.
Table 4-11: Options Available for ALL INPUTS or Individual Input Channel
as Selected in Configure Output Menu Level 1