evertz XRF1 - LNB Power (LNB Option Only); Communication and Control; Electrical; Compliance

XRF1/XRF1A 16x16 RF Router Manual
XRF1 - 8-2 Revision 1.2 SPECIFICATIONS
8.1.4. LNB Power (LNB option only)
LNB Maximum Output Current (per connector): 400 mA @ +13/+17 VDC (selectable)
8.1.5. Communication and Control
Serial: RS232/RS422 selectable – Female 9 pin D connector
Ethernet: SNMP over IEEE 802.3/U (10/100 BaseTx) RJ45 connector
Control: Front panel, VistaLINK
®
Control Panels: X-NCP2
8.1.6. Electrical
AC Mains Input: Auto ranging, 100 Ù 240 VAC, 50/60 Hz
Maximum Power Consumption:
40 Watts max. w/o LNB power option
175 Watts max. with LNB power option
Power Supply Configuration: 1 supply standard, optional redundant supply requires separate inlet
Connector: IEC 60320 - 1 per power supply
Fuses:
Standard: 1 amp, 250 Volt time delay 5 x 20 mm (T1AL250V). – 2 per PSU
LNB option: 4 amp, 250 Volt time delay 5 x 20 mm (T4AL250V). – 2 per PSU
8.1.7. Compliance
Safety: CSA Listed to CSA C22.2 No. 60065-03, UL 60065-03
IEC 60065-(2001-12) 7th Edition
Complies with CE Low voltage Directive 93/68/EEC
EMC: Complies with FCC part 15, class A
Complies with EU EMC directive 89/336/EEC
8.1.8. Physical
Height: 1.75” (45 mm)
Width: 19” (483 mm)
Depth: 18.75” (477 mm)
Weight: Approx. 7.4 lbs. (7.9 Kg)
Temperature: 0 - 40°C