Excell EX-2001 Racer Plus - Chapter 5 Capacity Calibration; Parameter Setting; Flow Diagram

EX-2001 Plus v1.3 SME300000060
11
EXCELL PRECISION CO., LTD.
Fn
CHAPTER 5 CAPACITY CALIBRATION
5-1 PARAMETER SETTING
Switch the capacity calibration switch to “ON” and the display shows .
Press the key and the display shows . then enter the setting mode.
Refer to 3-1 Front Panel for the key functions to set the relative parameters.
5-1-1 Flow Diagram
1.
2.
3.
4.
4.
5.
5.
.
Decimal Point
.
.
Setup completed
Max. Capacity
Setup completed
Min. Division
.
Setup completed
Zero Tracking
.
.
.
Setup completed
Unstable
Detection
.
Switch the
calibration switch
to OFF
Setup completed
.
Using and keys to
choose the desired
settings
⇒ Shift the flashing digit
one space to left
⇒ Shift the flashing digit
one space to right
⇒ Save the settings
⇒ Exit the settings