Excell PH3 User Manual

EXCELL PRECISION CO., LTD.
PH3 IP 68 Waterproof
Check-weighing Indicator
User Manual
© EXCELL PRECISION CO., LTD. 2018. All rights reserved worldwide.
The information contained herein is the property of EXCELL PRECISION CO., LTD.
and is supplied without liability for errors or omissions. No part may be reproduced or
used except as authorised by contract or other written permission. The copyright and
the foregoing restriction on reproduction and use extend to all media in which the
information may be embodied.

Excell PH3 Specifications

General

Brand	Excell
Model	PH3
Category	Accessories
Language	English

Summary

BEFORE USING THE SCALE

PRECAUTIONS FOR USE

Important safety and usage guidelines for the scale.

PREPARING TO USE THE SCALE

SPECIAL NOTICE

ASSEMBLING NOTICE

Instructions for assembling the scale case with torque specifications.

CHAPTER 1 INTRODUCTION

1-1 Features

Lists the key features and capabilities of the PH3 indicator.

1-2 Specifications

Details the technical specifications of the weighing indicator.

1-4 Power Supply

Explains the power supply options and consumption details.

1-5 Explanation of Display

Details the various indicators and segments of the scale's LCD display.

1-6 Explanation of Keypad

Describes the function of each key on the scale's keypad.

CHAPTER 2 BASIC OPERATING FUNCTIONS

Simple weight mode

Describes the basic weighing mode for simple weight display.

Limit weight mode

Explains the weight check mode with high/low limit settings.

Target weight mode

Details setting a target weight with an allowable range.

2-1 Simple Weight Mode

Step-by-step guide for operating the simple weight mode.

2-2 Limit Weight Mode

Step-by-step guide for setting up the limit weight check mode.

2-3 Target Weight Mode

Step-by-step guide for setting the target weight and allowable range.

2-4 Tare Function

Explains how to use the tare function to subtract container weight.

CHAPTER 3 EXTERAL CALIBRATION

Overall workflow of the Advanced Function settings mode

3-1 General Function Settings

Introduces the General Function settings mode with 16 available functions.

3-1-1 Automatic Backlight Function Settings

3-1-2 Automatic Power-off Timer Settings

3-1-3 HI/LO Weight Check Settings

3-1-4 HI/LO Alarm Settings Function

3-1-5 Analog and Digital Display Settings

3-1-6 Weighing Speed Settings

3-1-7 Operation Mode Settings

3-1-8 Weight and Percentage Mode Settings

3-1-9 Lock Function Settings

3-1-10 Relay Settings

3-1-11 Auto Zero Tracking

3-1-12 Printer Key Accumulation Function

3-1-13 Tare Cancellation Settings

3-1-15 HI/LO / OK Positive / Negative Weight Settings

3-1-16 HI/LO/OK Tare Time Settings

3-2 Weight Calibration

Details the two functions available in the Weight Calibration settings mode.

3-2-1 Weight Calibration

Step-by-step procedure for performing weight calibration.

3-2-2 Restore to the Default setting

3-3 RS-232 Bi-directional Function Settings

Introduces the 14 functions for RS-232 bi-directional communication settings.

3-3-1 Baud Rate Settings

3-3-2 Communication Protocol Settings

3-3-3 Output Format Settings

3-3-4 Continuous Transmission Settings

3-3-5 Selection of the Continuous Transmission Rate

3-3-6 Output Condition Settings

3-3-7 Auto Transmission at Zero

3-3-8 Reset of Auto Transmission

3-3-9 Condition of Manually Printing

3-3-10 Real Time Clock (Hour)

3-3-11 Real Time Clock (Date)

3-3-12 RS-232 Serial Interface Settings Mode

3-3-13 RS-232 General or Simple Output Weight Selection

3-3-14 The Date Format Settings

Appendix 1 RS-232 Serial Interface

Appendix 2 Error Messages