Excell PH3 User Manual

02006100 ZSME300000379
38
EXCELL PRECISION CO., LTD.
3-1-14
Previous Zero Record Settings
 Available in non-approved model only
3-1-15
HI / LO / OK Positive / Negative Weight Settings
 FNC 15 settings can only be available under “Limit Weight Mode” and “Target Weight
Mode.”
 FNC 15 settings can be arranged in groups to work with FNC 03 and FNC 04.
 If FNC 03 setting is “00” and FNC 15 setting is “01” or “03”,immediate tare function is
available.
C key  clear parameter
Enter key  perform action
C key  clear parameter
Enter key  perform action
Zero key  perform zero record
Press Enter key
Press Enter key
Parameter settings:
00  To abort previous zero recording
01  To enable previous zero recording
Factory default setting: 00
Press Enter key
Press Enter key
Parameter settings:
00  HI / LO / OK positive weight display
01  HI / LO / OK positive weight display
and then tare
02  HI / LO / OK negative weight display
03  HI / LO / OK negative weight display
and then tare
Factory default setting: 00

Excell PH3 Specifications

General

Brand	Excell
Model	PH3
Category	Accessories
Language	English