Excell PH3 - 3-1-13 Tare Cancellation Settings

02006100 ZSME300000379
37
EXCELL PRECISION CO., LTD.
3-1-13
Tare Cancellation Settings
Select
in the General Function settings mode to
change the tare cancellation settings.
 FNC 13 settings are not available for OIML and NTEP approval models.
C key  clear parameter
Enter key  perform action
Parameter settings:
00  Use TARE key to call off settings
01  TARE value cancelled automatically
by moving objects from the platter
Factory default setting: 00
Press Enter key
Press Enter key
To exit the general
function settings, key in
“00” and press Enter
key.