Excell PH3 - 3-1-16 HI;LO;OK Tare Time Settings

02006100 ZSME300000379
39
EXCELL PRECISION CO., LTD.
Press Enter key
3-1-16
HI / LO / OK Tare Time Settings
 FNC 16 settings can be available only when FNC 15 has been set to “01”.
 If FNC 03 is set to “00”, immediate tare function is available whatever setting of FNC 16 is.
C key  clear parameter
Enter key  perform action
Zero key  perform zero record
Press Enter key
Parameter settings:
00  To tare after being stable for 1/2 s
01  To tare after being stable for 1 s
02  To tare after being stable for 2 s
03  To tare after being stable for 3 s
Factory default setting: 00