Appendix 2 Error Messages
EEPROM does not function.
Zero value* after power on is too high.
Zero value* after power on is too low.
The internal value is unstable.
The platter is slanted (i.e. not level).
A/D IC is over the resolution.
When the above error messages occur, please contact your
supplier for professional help immediately.
The weight on the platter is over the capacity + 9 division.
When the above error message occurs, please take away some
of your objects on the platter.
*For Sri Lanka approval and non-approval models, zero value inspection range and
return-to-zero range is less than or equal to 3%.
To Next Page
Loading...
Need help?
General
