SPECIAL NOTICE
In some certain conditions, the stainless case of indicator will be opened to set up the load
cell, connect the power cable, or replace the new rechargeable battery, please contact your
local service people to avoid any damage of waterproof.
Before opening the stainless case, please ensure the indicator is free of moisture, if
necessary, any liquid should be wiped off.
The assembling notice as below should be strictly followed to assure the waterproof
performance. We strongly suggest that these procedures should be operated by the technical
staff of your supplier.
ASSEMBLING NOTICE
Screw the case with a torque screwdriver of 12 kgf-cm in the following orders. Do not screw
tightly before all screws are in the positions.
Screwing orders:
To Next Page
Loading...
Need help?
General
