Excell PH3 User Manual

02006100 ZSME300000379
28
EXCELL PRECISION CO., LTD.
3-1-4 HI / LO Alarm Settings Function
Select in the General Function settings mode
to set the HI / LO Alarm function.
 FNC 04 settings are available only when the scale is in Limit Weight Mode or Target
Weight Mode.
C key  clear parameter
Enter key  perform action
Parameter settings:
00  No Alarm
01  The Beeper sounds intermittently at LO
status
02  The Beeper sounds intermittently at OK
status
03  The Beeper sounds intermittently at LO
and OK status
04  The Beeper sounds intermittently at HI
status
05  The Beeper sounds intermittently at HI
and Low status
06  The Beeper sounds intermittently at HI
and OK status
07  The Beeper sounds intermittently at
High, Low and OK status
08  No Alarm
09  The Beeper sounds continually at LO
status
10  The Beeper sounds continually at OK
status
11  The Beeper sounds continually at LO
and OK status
12  The Beeper sounds continually at HI
status
13  The Beeper sounds continually at HI
and Low status
14  The Beeper sounds continually at HI
and OK status
15  The Beeper sounds continually at HI,
Low and OK status
Often used settings are “02” and “05”.
Factory default setting: 00
Press Enter key
Press Enter key
To exit the general
function settings, key in
“00” and press Enter
key.

Excell PH3 Specifications

General

Brand	Excell
Model	PH3
Category	Accessories
Language	English