PREPARING TO USE THE SCALE
1. Locate the scale on a firm level surface free from vibrations for accurate weight readings.
2. Avoid operating the scale in direct sunlight or drafts of any kind.
3. If possible, avoid connecting the scale to AC power outlet sockets which are adjacent to
other appliances to minimise the possibility of interference affecting the performance of the
scale.
4. Remove any weight that might be on the platter before the scale is switched on and avoid
leaving weight on the platter for long periods of time.
5. All goods weighed should be placed in the centre of the platter for accurate weighing. The
overall dimensions of the goods being weighed should not exceed the dimension of the
platter.
6. Once the scale has been powered on, it will go through a LCD display test and it is ready
for use when the display shows zero.
7. The scale requires 15 to 20 minutes warm up before operation to ensure best accuracy.
8. When the power bar indication turns to be low battery , it means the battery
should be recharged immediately.
9. Introduction of Storage Battery
To Next Page
Loading...
