Excell EX2005 User Manual

User Manual
EX2005
© Excell Precision Limited 2015. All rights reserved Worldwide.
The information contained herein is the property of Excell Precision Limited and is supplied
without liability for errors or omissions. No part may be reproduced or used except as
authorised by contract or other written permission. The copyright and the foregoing
restriction on reproduction and use extend to all media in which the information may be
embodied.

Excell EX2005 Specifications

General

Brand	Excell
Model	EX2005
Category	Accessories
Language	English

Summary

General Function Guide

Error Messages (Display in General Function setting)

List and explanation of error messages displayed in general function.

Function Setting

Detailed steps for configuring various functions.

Calibration

Load Cell Connection

Parameter Setting and Calibration Flow Chart

Visual representation of the calibration process and parameter settings.

MODBUS Calibration

Steps for performing calibration using the MODBUS protocol.

Specification calibration

Procedure for setting specific calibration parameters.

General Calibration

Detailed steps for performing general weight calibration.

Linearity calibration

Procedure for calibrating the linearity of the scale.

Digital calibration

Steps for performing digital calibration of the scale.

Weight Comparison Procedures

Check Weighing Configuration

Steps for configuring check weighing parameters and settings.

Maintenance

Restore All Parameters to Their Default Factory Values.

Procedure to reset all parameters to factory defaults.

Maintenance Function Parameters

Test mode