56
04011210
EXCELL PRECISION CO., LTD
ZSME400000003
6-2-1 Restore the function parameter back to its default value
(1) During the indicator count back to zero, press keys.
(2) The display shows .
(3) Press the key and the display shows . flashing.
(4) Confirm / abort.
(4-1) To confirm, press the key & don’t release it. The display will then show .
(4-2) To abort press the key or switch the power off.
6-2-2 Clear zero compensation and TARE values
(1) During the indicator count back to zero, press keys.
(2) The display shows press the F1 key to display .
(3) Press the key, the display shows . flashing.
(4) Confirm / abort.
(4-1) To confirm press the key & don’t release it. The display will then show
(4-2) To abort press the key or switch the power off.
6-2-3 Clear batch setting
(1) During the indicator count back to zero, press keys
(2) The display shows press the F1 key to display .
(3) Press the key, the display shows . flashing.
(4) Confirm / abort.
(4-1) To confirm press the key & don’t release it. The display will then show
(4-2) To abort press the key or switch the power off.
6-2-4 Display zero voltage (mV/V)
(1) During the indicator count back to zero, press keys.
(2) The display shows press the F1 key to display
.
(3) Press the key the display shows the zero voltage (mV/V). e.g
.
.
(4) Press the key or switch the power off.
6-2-5 Clear batch setting
(1) During the indicator count back to zero, press keys.
(2) The display shows press the F1 key to display
.
(3) Press the key, the display shows the span voltage (mV/V). e.g.
.
(4) Press the key or switch the power off.