Excell PH3 - CHAPTER 3 EXTERAL CALIBRATION; Overall workflow of the Advanced Function settings mode

02006100 ZSME300000379
22
EXCELL PRECISION CO., LTD.
CHAPTER 3 EXTERAL CALIBRATION
In the weighing mode, press the TARE and ZERO keys at the same time to enter
the Advanced Function settings mode. The LCD2 shows and
use MR to select the desired mode.
Overall workflow of the Advanced Function settings mode is as follows:
Press MR key
Press MR key
Press MR key
 General Function Settings Mode
 Weight Calibration
 RS-232 Bi-directional Function Settings
 Exit the Advanced Function Settings Mode
Refer to the following sections for the detailed operating
procedures of each function settings.
Press
MR
key