Exmark Lazer Z Series User Manual

Safety
decalptoswitch
PTOSwitchSymbols
g232519
FuelCap
1.Diesel2.BiodieselReady—Read
theOperator’sManual.
decal126-8383
126-8383
Thismachinecomplieswiththeindustrystandardstabilitytestinthestaticlateralandlongitudinaltestswiththe
maximumrecommendedslopeindicatedonthedecal.Itisimportantthateachoperatorreviewtheslopeoperation
instructionsintheoperator’smanualandreviewtheconditionsinwhichthemachineisbeingoperatedtodetermine
ifthemachinemaybeoperatedintheconditionsthatdayandonthatsite.Changestoterraincanresultina
changeinslopeoperationforanymachine.
1.Warning-ReadtheOperator’sManual.DoNotoperatethis
machineunlessyouaretrained.Wearhearingprotection.
4.Bodilyharmhazard-lookbehindyouwhenmowingin
reverse.
2.Cuttingandpinchinghazard-keephandsandfeetaway
frommovingparts;keepallguardsandshieldsinplace.
5.Thrownobjecthazard-keepbystandersaway.
3.Ramphazard-whenloadingontoatrailer,donotuse
dualramps;onlyuseasingularrampwideenoughforthe
machineandthathasaninclinelessthan15degrees;
backuptheramp(inreverse)anddriveforwardoffthe
ramp.
6.Tippinghazardonslopes-donotuseonslopesnearopen
water;donotuseonslopesgreaterthan15degrees.
16

Exmark Lazer Z Series Specifications

General

Engine Brand	Kawasaki, Kohler
Engine Type	Air-cooled, 4-stroke, gasoline
Cutting Width	52 in, 60 in, 72 in
Deck Construction	Fabricated
Deck Material	Steel
Drive Type	Hydrostatic
Transmission	Hydrostatic
Forward Speed	Up to 12.5 mph
Reverse Speed	Up to 5 mph
Tires (Rear)	26 x 12-12 (depending on model)
Turning Radius	Zero-turn
Cutting Height	1.5-5 inches (adjustable)
Speed	Up to 12.5 mph
Warranty	5-year / 1, 500-hour (Engine warranty varies by manufacturer)