Exmark Lazer Z Series User Manual

Maintenance
Maintenance
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
WARNING
Whilemaintenanceoradjustmentsarebeing
made,someonecouldstarttheengine.
Accidentalstartingoftheenginecouldseriously
injureyouorotherbystanders.
Removethekeyfromtheignitionswitch
andengageparkingbrakebeforeyoudoany
maintenance.
WARNING
Theenginecanbecomeveryhot.Touchingahot
enginecancausesevereburns.
Allowtheenginetocoolcompletelybefore
serviceormakingrepairsaroundtheenginearea.
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst100hours
•Checkthewheellugnuts.
•Checktheparkbrakeadjustment.
Aftertherst200hours
•Changethedeckgearboxoil.
•Changetheengineoilandlter.
•Changethehydrauliclteranduid.
Beforeeachuseordaily
•Checktheengineoillevel.
•Checkthemowerblades.
•Checkthesafetyinterlocksystem.
•Checktherolloverprotectionssystems(rollbar)knobs.
•Checktheseatbelt.
•Checkforloosehardware.
•Checkhydraulicreservoirlevel.
•Checkenginecoolantlevel.
•Cleantheengineandexhaustsystemarea.
•Cleanthegrassanddebrisbuild-upfromthemachineandcuttingdeck.
•Cleanthegrassbuild-upfromunderthecuttingdeck.
Every50hours
•Checkthedeckgearboxoil.
•Checkthetirepressures.
•Checktheconditionofthebelts.
•GreasedriveU-jointsandsplinedslipjoint.
•Drainfuellter/waterseparator.
•Cleantheenginecoolingsystem.
Every200hours
•ChangetheengineoilandlterifnotusingExmarkPremiumEngineOilbutanyoil
meetingAPICJ-4orhigherorasstatedintheSpecicationsSection.
Every400hours
•Replacetheaircleanerelements.(Mayneedmoreoftenundersevereconditions.Seethe
EngineOwner'sManualforadditionalinformation.)
•Greasedeckidlerpivots.
•Greasecasterwheelspindles.
•Replacethefuellter/waterseparator(moreoftenindirtyordustyconditions).
•Changethedeckgearboxoil.thereafter.
•ChangetheengineoilandlterifusingExmarkPremiumEngineOil(APICK-4orhigher)
(Mayneedmoreoftenundersevereconditions.)
•ChangethehydrauliclteranduidifusingMobiluid™424.
•Checktheparkbrakeadjustment.
39

Exmark Lazer Z Series Specifications

General

Engine Brand	Kawasaki, Kohler
Engine Type	Air-cooled, 4-stroke, gasoline
Cutting Width	52 in, 60 in, 72 in
Deck Construction	Fabricated
Deck Material	Steel
Drive Type	Hydrostatic
Transmission	Hydrostatic
Forward Speed	Up to 12.5 mph
Reverse Speed	Up to 5 mph
Tires (Rear)	26 x 12-12 (depending on model)
Turning Radius	Zero-turn
Cutting Height	1.5-5 inches (adjustable)
Speed	Up to 12.5 mph
Warranty	5-year / 1, 500-hour (Engine warranty varies by manufacturer)