Name: Exmark Lazer Z Series
Brand: Exmark
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Maintenance

g231880

Figure35

1.Filter

3.Watershoulddrain.

4.Whenfuelbeginstoowfromthelter,tighten

thedrainplug.

Important:Waterorothercontaminantsinfuel

canseverelydamagefuelpumpand/ortheother

enginecomponents.

ChangeFuelFilter/Water

Separator

ServiceInterval:Every400hours/Yearly

(whichevercomesrst)

(moreoftenindirtyor

dustyconditions).

DANGER

Useofimpropercomponentscanresultinsystem

failure,fuelleakageandpossibleexplosion.

•EnsurethatanAuthorizedServiceDealer

replacethefuellterandanycomponentsfor

thefuelsystem.

•Useonlyapprovedfuellines,hoseclamps

andfuelltersforhighpressuresystems.

g031412

Figure36

The3TNV88Cenginehastwofuellters;see

Figure37forlocations.

Other manuals for Exmark Lazer Z Series

Questions and Answers:

Need help?

Do you have a question about the Exmark Lazer Z Series and is the answer not in the manual?

General

Engine Brand	Kawasaki, Kohler
Engine Type	Air-cooled, 4-stroke, gasoline
Cutting Width	52 in, 60 in, 72 in
Deck Construction	Fabricated
Deck Material	Steel
Drive Type	Hydrostatic
Transmission	Hydrostatic
Forward Speed	Up to 12.5 mph
Reverse Speed	Up to 5 mph
Tires (Rear)	26 x 12-12 (depending on model)
Turning Radius	Zero-turn
Cutting Height	1.5-5 inches (adjustable)
Speed	Up to 12.5 mph
Warranty	5-year / 1, 500-hour (Engine warranty varies by manufacturer)