Extec E-7 - Page 59

To Next Page

To Previous Page

E-7

POWERPACK ASSEMBLY

DETAILED VIEW OF AIR FILTER

DETAILED VIEW OF FAN

DETAILED VIEW OF BELL HOUSING

Appendix 2 Page48

E-7

POWERPACK ASSEMBLY

VIEW ON ENGINE

VIEW ON PULLEY BELTS

Appendix 2 Page49

Main Page

Table of Contents3
Safety Instruction4
Personnel Safety Warnings5
Machine Safety Warnings5
Component Safety Features6
Features for Operator Safety6
Environmental Safety6
Personal Protective Equipment (PPE)6
Measured Noise Levels7
Vibration Levels7
Organisational Safety Measures7
Personnel Qualification, Requirements and Responsibilities7
Safety Advice Regarding Specific Operational Phases8
Standard Operation8
Blockage or Malfunction8
Unguarded Areas8
Special Work. such as Plant Maintenance and Repairs During Operation; Disposal of Parts and Consumables8
Isolation8
Maintenance Site Conditions8
Replacement & Removal of Component8
Climbing and Falling8
Safety Consideration During Advanced Maintenance9
Removal of Safety Devices and Guards9
Surrounding Structures9
Safety When Refuelling9
Specific Hazards10
Electrical Energy10
Gas, Dust, Steam, Smoke and Noise10
Description and Technical Information11
Hydraulic Equipment11
Hazardous Substances11
- Operation Description12
- Key Features12
- Common Applications12
- Machine Layout Indicating Emergency Stop Positions13
- Machine Layout Indicating Main Components13
- Dimensions14
Data14
- Transport Commissioning and Operation Contents15
- Machine Transportation15
- Machine Transportation Dimensions16
Pre Start Instructions16
Machine Starting Sequence17
- Stopping the Machine17
  - Emergency Stopping17
  - Tracking (Moving) Procedure18
- Controls Overview19
- Opening Side Conveyors19
Preparing the Machine for Operation19
- Opening Tail Conveyor21
- Apron Feeder22
- Opening Walkways23
- Setting Screenbox Height23
- Adjusting Conveyors Speed24
- Loading Material into Machine24
Operating the Machine24
- Daily Maintenance Schedule25
- Maintenance25
- Checking/Changing Hydraulic Tank Air Breather27
- Greasing Bearings27
- Weekly Machine Maintenance27
- Inspecting/Adjusting Belt Rubbers28
- Machine Maintenance Every 250 Hrs29
- Screenbox Maintenance29
- Increasing the Track Tension30
- Machine Maintenance Every 1000 Hrs30
- Releasing the Track Tension30
- Track Adjustment30
- Tensioning and Tracking of Conveyor Belts31
- Screenbox Bottom Deck Mesh Access33
- Screenbox Mesh Fitting33
- Screenbox Punched Plate Removal33
- Trouble Shooting Guide34
Screen Mesh Replacement33

Extec E-7 - Page 59

Table of Contents

Related product manuals