Extron electronics DXP 44 HD 4K PLUS - Page 66

DXP HD 4K PLUS Series • SIS Configuration and Control 58
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Device Commands (continued)
Verbose Mode
Set verbose mode
EX2#CV} Vrb X2#]
Enable or disable verbose mode
and tagged responses, where
additional information is provided
in response to a query.
View verbose mode
ECV} X2#]
View the verbose mode.
Information Requests
General information
I
VX! XX@
•
AX! XX%]
View the number of inputs and
outputs for video and audio
connectors on the device.
Info00*VX! XX@
•
AX! XX%]
Verbose modes 2 and 3
NOTE: VX! XX@ is the video matrix size. AX! XX% is the audio matrix size.
View firmware version
Q
X2%]
View the current firmware
version.
View firmware and build
version
*Q
n.nn.nnnn]
View the firmware version and
build number.
KEY:
X! = Input number
1 through <maximum number of inputs>.
X@ = Output number
HDMI output, 1 through <maximum number of outputs>:
DXP 42 — 1 or 2, DXP 44 and 84 — 1-4, DXP 88 — 1-8
X% = Analog audio and S/PDIF output number
1 or 2
X2# = Verbose mode
0 = clear or none (default for Telnet connections)
1 = verbose mode (default for RS-232 and USB connections)
2 = tagged responses for queries
3 = verbose mode and tagged queries
X2% = Firmware version
n.nn