SSP200 • Product Configuration Software 33
Figure 28. Input/Output Configuration Panel
HDMI Input 1
1
Resolution — Displays the resolution of the HDMI input.
2
HDCP Status — Indicates the HDCP status of the input source. The HDMI input
negotiates and authenticates HDCP with the source device if the source requires HDCP
encryption.
Symbol Definition
The signal is HDCP encrypted.
The signal is not encrypted.
3
HDCP Authorized — Select this checkbox to turn HDCP Authorized on (default)
or off. When disabled (Off), the source is blocked from encrypting its output. This may
result in some content not being passed to the output.
DMP EXP Input
4
Replace Input channel — Enables the EXP Input by replacing one of the selectable
input channels Input 2 (Coaxial), Input 3 (Optical), or Input 4 (Optical).
5
Set EXP Input channel pair — Sets the EXP Input channel pair to two of the 16
possible audio channels.
Analog Input 5
6
Analog Input Gain — Adjusts the gain of the signal on Input 5. When Input 5
(Analog) is selected, the Analog Input Gain controls are available to adjust the gain
either by adjusting the fader manually or by entering a gain value in dB.
28
To Next Page
Loading...
