SSP200 • Product Configuration Software 47
Speaker Equalization/Output EQ
The Output EQ tab brings up the Speaker Equalization that provides nine parametric
EQs for each output channel (see figure40).
Figure 40. Speaker Equalization/Output EQ
The default frequency values correspond to a nine‑band graphic equalizer, which provides a
starting point for refining the output signal from each speaker channel.
All the properties of the SSP 200 parametric filters can be adjusted by the user.
The numbers are used to select the filters for utilizing the copy/paste function or to change
the focus on the graph to the left. Filters are automatically selected when a parameter is
adjusted.
The Active column has toggle buttons for activating (or unbypassing) a filter. A filter only
affects the signal if it is active (blue).
Speaker Selection
To begin the adjustment, first select the speaker to be configured from the Speaker
Equalization For drop‑down list.
Figure 41. Speaker Selection
40
41
To Next Page
Loading...
