BEISSBARTH MT 870 / MT 880
3-2
Display help information
First press the help button, then the key for which help is needed.
General-function screen buttons
Quit screen page
This closes the displayed page on the screen and moves back to the previous
page.
Start balancing run
When the balancing procedure has been started, the only screen button
remaining operative is the “Stop” button (see below).
Stop
Press this button to halt the balancing run and the visual inspection. The
balancing process can also be halted by opening the wheel guard with due
care.
Previous page
If the help window is more than one page long, you can use this button to
display the previous page.
Next page
If the help window is more than one page long, you can use this button to
display the next page.
OK
When the match routine is being run, use the “OK” button to confirm the suc-
cessive work steps.
Important:
To protect the monitor screen tube, the screen saver is automatically activated.
By activating the Action-Center the last picture shown is displayed again on the screen.
To Next Page
Loading...
