22/07/2019
57
SERVICE MANUAL
EVO FRONT LOADING DISHWASHER
9.6.20. ENERGY SAVING FUNCTION:
The ADVANCE model has a energy saving function which operates as follows:
- Stand-by mode: When the machine is on stand-by, the boiler maintenance temperature is 5 ºC lower
than the setting temperature.
- Saving mode: If the machine does not run a programme in an interval of 30 minutes, the dishwasher
switches to SAVING MODE. In this mode, the boiler maintenance temperature is 10 ºC lower and the
tank temperature 5 ºC lower than the setting temperatures
9.6.21. USER OPTIONS MENU
To access the User Menu, press the “MENU” key for 5 seconds
To access the User options menu with the machine OFF press the “MENU” key for 5 seconds.
Press the “MENU” key to scroll through the different options in the “MENU”.
Press the “START” key to select the value of the different options.
To scroll through the User Menu press the MENU button to change option and the START button to select an
option and enter the different levels.
The default setting of the appliance is English. Therefore go to LANGUAGE to change the language. To go to the
User Menu in the LANGUAGE option, press START. Select the required language by pressing MENU to select and
START to confirm.
To configure the date and the time, go to DATE/TIME. With the format DAY/MONTH/YEAR HOUR/MINUTE
(D
1
D
2
/M
1
M
2
/A
1
A
2
H
1
H
2
/m
1
m
2
) use the MENU and START buttons to change the digits one by one (the active digit
flashes).
It is also possible to confirm the setting without reaching the last value, by pressing the START button for 3
seconds.
The options available are:
Press “MENU” for 5 seconds
To Next Page
Loading...
