Installation manual
CNC 8035
MACHINE PARAMETERS
Tables
4.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·173·
4.9 Tables
4.9.1 Miscellaneous (M) function table
The number of M functions in this table is determined by the g.m.p. NMISCFUN (P29), being possible
to define up to 255 M functions.
It must borne in mind that functions: M00, M01, M02, M03, M04, M05, M06, M8, M9, M19, M30,
M41, M42, M43 and M44, besides what is indicated in this table, have specific meanings when
programming the CNC.
Each miscellaneous function will be called by its M number.
A subroutine can be associated with each M function and it will be indicated by the letter S.
The third field consists of 8 customizing bits called bit 0 through bit 7:
bit 0
Indicates whether the CNC must wait or not for the AUXEND signal (M done) to consider it executed
and go on to the next program block
Possible values
Integer numbers between 0 and 9999.
The table elements that are not defined will be displayed as M????.
Possible values
Integer numbers between 0 and 9999.
If 0 is assigned to this field, it means that the M function has no subroutine associated
with it.
********
76543210
Value Meaning
0 The AUXEND signal is expected.
1 The AUXEND signal is NOT expected.
To Next Page
Loading...
