CNC 8035
·9·
ABOUT THE PRODUCT
Basic characteristics.
Software options.
RAM memory 256 Kb
PLC cycle time 3 ms / 1000 instructions
RS-232 serial line Standard
DNC ( via RS232 ) Standard
5 V or 24 V probe inputs 2
Digital inputs and outputs. 40 I / 24 O
Feedback inputs for the axes and spindle 4 TTL/1Vpp inputs
Feedback inputs for handwheels 2 TTL inputs
Model
M-MON M-MON-R M-COL M-COL-R T- MO N T-C OL
Number of axes 3 3 3 3 2 2
Hard disk Opt Opt Opt Opt Opt Opt
Electronic threading Stand Stand Stand Stand Stand Stand
Tool magazine management: Stand Stand Stand Stand Stand Stand
Machining canned cycles Stand Stand Stand Stand Stand Stand
Multiple machining Stand Stand Stand Stand ----- -----
Rigid tapping Stand Stand Stand Stand Stand Stand
DNC Stand Stand Stand Stand Stand Stand
Tool radius compensation Stand Stand Stand Stand Stand Stand
Retracing ----- Stand ----- Stand ----- -----
Color monitor ----- ----- Stand Stand ----- Stand
Before start-up, verify that the machine that integrates this CNC meets the 89/392/
CEE Directive.
To Next Page
Loading...
Need help?
General
