Installation manual
CNC 8035
CNC-PLC COMMUNICATION
Access to the PLC from a PC, via DNC
9.
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·327·
9.5 Access to the PLC from a PC, via DNC
The CNC allows the PLC to communicate with a computer via DNC through the RS232C serial line.
In this way a computer can access the PLC carrying out:
• Transfer and reception of the user PLC program.
• Monitoring of the user PLC program.
• Monitoring of PLC resources.
• Consultation or modification of PLC resources.
• Execution of PLC commands (compile, execute, etc.).
• Etc.
The DNC manual can be applied for from the Commercial Department of Fagor Automation.
To Next Page
Loading...
Need help?
General
