CNC 8035
·23·
Version history (T)
Software V16.31 January 2009
Software V16.32 July 2009
Software V16.33 May 2010
List of features Manual
Saving the last 10 MDI instructions.. OPT
Turn the "retrace with Look-Ahead" function on. INST
Monitoring of the difference between the first and second feedback. INST
Improved safety with absolute feedback. INST
Improved tool changer. INST
Gear ratio management on axes and spindle. INST
Threading without spindle orientation. PRG
PLC monitoring in ladder diagram language. OPT
Profile editor: Polar and incremental coordinates. OPT
List of features Manual
DISBLO variable: total distance programmed in blocks with look-ahead INST
List of features Manual
Incompatibilities in tool change. INST
Zig-zag grooving mode. OPT-TC
To Next Page
Loading...
