Fagor CNC 8035 - Page 376

 Installation manual
CNC 8035
11.
ACCESS TO INTERNAL CNC VARIABLES
Variables associated with work zones
(SOFT M: V15.3X)
(S
OFT T: V16.3X)
·376·
FOZUP(X-C)
Upper limit of zone 4 along the selected axis (X-C).
FIZONE
Status of work zone 5.
FIZLO(X-C)
Lower limit of zone 5 along the selected axis (X-C).
FIZUP(X-C)
Upper limit of zone 5 along the selected axis (X-C).