Faraday MPC-1500 Plus - RS232 Printer Output; Initiating Device Circuits (Optional Board P;N 12503; DACT Expansion Module (Optional Module P;N 12513; Alarm Relay Board (Optional Board P;N 12402

To Next Page

To Previous Page

12530/12540 OWNER'S MANUAL

P/N 447203 Issue I II-11

RS232 Printer Output

• Power limited

• Not supervised

• Voltage Range: -15 VDC to +15 VDC

• Maximum Current (shorted): 0.050A

• Baud Rate: 4800

• Maximum wire loop resistance: 25 ohms

Initiating Device Circuits (Optional board P/N 12503)

• Expandable in groups of 4 to 8 Class B, Style B circuits with optional expansion boards

Convertible to Class A, Style D circuits with optional adapter

• Power limited

• Supervised

• Standby Voltage Range: 16-27 VDC

• Maximum Standby Current: 10.3 mA

• Maximum Smoke Detector Current: 3 mA

• Maximum Alarm Current: 48 mA

• Maximum Ripple: 1.5 VAC

• Maximum Wire Loop Resistance: 100 ohms

DACT Expansion Module (Optional module P/N 12513)

• Power limited

• Supervised for short or open circuit

• Maximum Voltage: 60 VDC

• Maximum Current (shorted): 0.100 A

Alarm Relay Board (Optional board P/N 12402)

• Power limited

• Contact Rating:

1 A, 30VDC maximum, resistive

0.5 A, 30VAC maximum, resistive