FARGO electronics HDPii - Reviewing the Telnet Command Table

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
6-6
Reviewing the Telnet Command Table
The following table describes available Telnet commands. (Note: You can enter partial full-
word commands, and the Printer will respond with additional help. For example, you can
enter “list”, and the Printer will respond with all subcommands to the list command.)
Telnet Command Command Purpose Command Format
?
help
Display help for Telnet
commands.
?
reset
Reset the Ethernet interface
for the Printer/encoder.
reset
ping
Send a ping command to
another IP address as a test
of the Ethernet interface.
ping <IPADDR>