RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
6-46
Using the Reboot pages
Rebooting the restarts the complete Printer, which includes the Print Server.
Rebooting the Printer
The Reboot page allows the User to reboot or reset the Printer and/or enter the upgrade
mode.
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
3 Select the Reboot link.
Continued on the next page
To Next Page
Loading...
