RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
6-30
Changing the Log Name
By default the names are log1 and log2. However, you can rename them from this page.
(Note: This also updates the link to the corresponding web page.)
Step Procedure
1 Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2). See the previous page.
3 Enter a new log name in textbox.
Continued on the next page
To Next Page
Loading...
