RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
3-2
Introduction
The following guide will walk you through the installation of the Fargo Driver.
Time Requirement
This software installation process will require approximately 2 to 6 minutes (depending on the
speed of your PC).
System Requirements
The System Requirements are as follows:
• IBM-PC or compatible, Windows® 32 bit 2K/XP, Pentium® class 500 MHz computer with
256MB of RAM or higher, 500MB free hard disk space or higher, USB 1.1
Inspecting the Printer
While unpacking your Printer, inspect the carton to ensure that no damage has occurred
during shipping. Make sure that all supplied accessories are included with your unit.
Unpacking the Printer
The following items are included with your Printer:
• Software Installation CD (includes Printer Driver, Online User’s Guide and Printer
Diagnostic Tool)
• Power Supply with Power Cord (Note: This product is intended to be supplied by a
Listed Power Unit marked "Class 2" and rated for 24 V dc, 3.75 to 5 A.)
• Card Cleaning Roller
• Card Cartridge
• Warranty Card
• Registration Card
(Important: Please use the original packaging when shipping the Printer/Output.)
To Next Page
Loading...
