RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
2-25
Printer Components: Flipper Table
Type Description
Exception
Feed
The printer has a simple single card exception feed that can be
initiated by an external command.
Cards (fed from the exception feed slot) feed from a +90° inclination
of the Flipper Table.
In the Kiosk mode, cards can move from the exception feed slot to
different positions for printing, magnetic encoding, and e-card
encoding, using the OMNIKEY modules.
Kiosk Mode The Kiosk mode is used to manually feed card stock into the printer,
using the module top slot.
Kiosk mode enabled: When a print job is sent to the printer, it will
rotate the Flipper Table to a vertical orientation and wait for a card to
be inserted.
• If a card is already present in the slot, a card jam error will result.
• A card can only be inserted into the slot after the Output is ready
to accept it.
To Next Page
Loading...
