RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
7-56
Adjusting the Transfer Dwell Time and Temperature (continued)
Step Procedure
2 Transfer Temperature Sets temperature for InTM transfer in Celsius Lower
limit = 150.0 Celsius, Upper limit = 190.0 Celsius
• UltraCard III - Composite: Default = 175.0 seconds per inch
• UltraCard- PVC: Default = 175.0 Celsius
• Custom: Default = 175.0 Celsius
To Next Page
Loading...
