FARGO electronics HDPii - Page 4

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDPii High Definition Card Printer/Encoder User Guide (Rev. 1.1)
iv
Section 5: General Troubleshooting __________________________________________5-1
LCD Messages _____________________________________________________________________ 5-1
Safety Messages (review carefully)______________________________________________________ 5-2
Troubleshooting - LCD and Printer Error Message Tables____________________________________ 5-3
How to use the LCD Error Message Table (example provided)______________________________ 5-4
Troubleshooting with the LCD Error Message Table______________________________________ 5-5
Troubleshooting with the Printer Error Message Table ___________________________________ 5-19
Communications Errors______________________________________________________________ 5-30
Resolving the Communication Errors_________________________________________________ 5-30
Printing a Test Image _______________________________________________________________ 5-32
Reviewing the Alignment Self Test Card______________________________________________ 5-34
Reviewing the Color Bars Self Test __________________________________________________ 5-35
Reviewing the Device Settings Self Test ______________________________________________ 5-36
Reviewing the Magnetic Self Test ___________________________________________________ 5-38
Reviewing the Resin Self Test ______________________________________________________ 5-39
Section 6: Ethernet Option Section ___________________________________________6-1
Introduction________________________________________________________________________ 6-1
Technical Specification - Ethernet Option ________________________________________________ 6-2
Functional Specification - Ethernet Option________________________________________________ 6-3
Network Services - Overview ____________________________________________________6-4
Reviewing the Print Server__________________________________________________________ 6-4
Reviewing the Web Page Server _____________________________________________________ 6-4
Reviewing the Network Management Interface __________________________________________ 6-4
Reviewing the Telnet Server ________________________________________________________ 6-4
Network Management Interface _________________________________________________6-5
Telnet Command Line Interface _________________________________________________6-5
Initiating a Telnet Session __________________________________________________________ 6-5
Reviewing the Telnet Command Table ________________________________________________ 6-6
Ethernet Web Pages – Standard Procedures ______________________________________6-12
Reviewing Web page security_________________________________________________________ 6-12
Logging In________________________________________________________________________ 6-13
Accessing the Home page ____________________________________________________________ 6-14
Reviewing the Home Page ___________________________________________________________ 6-15
Reviewing the Home Page Categories and Fields (table)__________________________________ 6-16
Configuring the Network Settings______________________________________________________ 6-16
Accessing the Network Settings page_________________________________________________ 6-17
Reviewing the Interface ___________________________________________________________ 6-18
Reviewing the Current Settings _____________________________________________________ 6-19
Switching to the Automatic IP Address Mode __________________________________________ 6-20
Changing to the Static IP Address Mode ______________________________________________ 6-21
Using the Clear Changes button_____________________________________________________ 6-23
Using the Media Information page _____________________________________________________ 6-24
Using the TCP/IP page ______________________________________________________________ 6-25
Using the TCP/IP page____________________________________________________________ 6-26
Using the Printer page_______________________________________________________________ 6-27
Using the System Log page___________________________________________________________ 6-29
Changing the Log Name___________________________________________________________ 6-30
Selecting the Log Type____________________________________________________________ 6-32
Selecting the Log Destination_______________________________________________________ 6-34
Setting up Email Event logging _____________________________________________________ 6-36
Specifying UDP Event logging _____________________________________________________ 6-38
Specifying TCP Event logging______________________________________________________ 6-40