FDE SO-CONNECT PID - Battery Charger

Partie I – Description of pump and accessories
19
Battery charger
The battery charger supplied with the SO
♥
CONNECT PID pump can recharge the VARTA EZPack L batteries.
The battery charger specifications are as follows:
Model number
MASCOT Type 3745
Rated AC voltage
90 – 264 VAC 47/63 Hertz
Charge voltage
4.2 VDC
Charge intensity
1.5 A
Dimensions
115 x 56 x 35 mm
Weight
175 g
Conditions of use
-25°C à +40°C
Storage conditions
-25°C à +85°C
Electrical safety
EN/IEC/ANSI 60601-1 3ed
EN/IEC 60335-1 et 2-29
EN/IEC/UL 62368-1
Electromagnetic compatibility
EN 61000-6-1 et -3
EN 60601-1-2
EN 55014-1 et -2
EN 55022 et EN 55024
EN 55032
Warning
▪ Do not attempt to recharge cells or batteries other than those supplied by France Développement Electronique.
▪ Disconnect the charger from the power socket when you no longer intend to use it. To disconnect the power cord, hold it by the
plug inserted in the socket. Do not pull it directly.
▪ Do not use the charger if the cord is damaged or if the charger has been dropped or is damaged.
▪ Do not twist the power cord excessively and do not place any heavy objects on it. That could damage it and lead to a fire or electric
shock.
▪ Do not dismantle the charger.
▪ Protect the charger from impacts and falls.