Partie IV – Syringe and infusion set
38
Filling the syringe
To fill the SO
♥
FILL syringe, please follow the steps below:
1. Unscrew and screw the plunger so that it can be unscrewed easily after filling the syringe.
2. Check the correct “tightening” between the plunger and the piston.
3. Push the plunger back and forth to uniformly lubricate the silicone inside the body of the SO
♥
FILL syringe.
4. To fill the SO
♥
FILL syringe, you can use the safety needle or a spike.
5. Screw the safety needle or the spike on the SO
♥
FILL syringe clockwise.
6. Fill the SO
♥
FILL syringe by sucking up the liquid slowly.
To Next Page
Loading...