Festo CMMS-ST-C8-7-G2 Assembly And Installation

5. Mechanical installation
100 Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH
5.2 Assembly
There are clips at the top and bottom of the CMMS-ST stepping motor controller. They are
used to attach the stepping motor controller vertically to a control cabinet mounting plate.
The clips are part of the radiator profile, ensuring an optimal heat transfer to the control
cabinet plate.
• Use size M4 screws to attach the CMMS-ST stepping motor
controller.
Fig. 5.2 CMMS-ST stepping motor controller: Assembly

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English