Festo CMMS-ST-C8-7-G2 Assembly And Installation

2. Safety instructions for electric drives and controllers
14 Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH
• Do not attempt to install or commission the stepping motor
controller until you have read all safety instructions related to
electrical drives and control systems in this document.
These safety instructions and all other user instructions must be
read before performing any work with the stepping motor
controller.
If you do not have user instructions for the stepping motor
controller, contact your local sales representative.
• Ask them to send the documents to the person responsible for
safe operation of the stepping motor controller immediately.
If the stepping motor controller is sold, rented and/or passed on in
any other way, these safety instructions must also be passed on
with it.
The operator may not open the stepping motor controller for safety
and warranty reasons.
Correct planning is required for the stepping motor controller to
function properly.
Warning
DANGER!
Incorrect use of the stepping motor controller, failure to follow the
warnings in this manual and improper manipulation of safety
equipment can cause material damage, injury, electric shock, and
in extreme cases, even be fatal.
2.3 Hazards due to improper use
Warning
DANGER!
High electric voltage and high operating current!
Danger of death or serious bodily injury due to electric shock!

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English