Festo CMMS-ST-C8-7-G2 Assembly And Installation

6. Electrical installation
104 Festo.P.BE-CMMS-ST-G2-HW-EN 1008NH
6.3 CMMS-ST complete system
A complete CMMS-ST stepping motor controller system is shown in Fig. 6.4. The following
components are required to operate the stepping motor controller:
Components - Power pack for the control voltage
- Power pack for the power supply
- Stepper motor controller CMMS-ST
- Motor with motor cable
- Increment generator cable (for motors with increment
generators)
A PC with a serial connection cable is required for parameterising.

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English